Templar's Gear Flat Pack H2 Backpack Back Panel with CPC Attachment, M05

It’s been a long time coming – the M05 Tradesoft is proud to present the fruits of co-operation with Templar’s Gear: tactical combat gear with the Finnish M05 camouflage! The aim of this co-operation is to fill a torso-sized hole in the Finnish gear market: before this, it was not possible to have a full combat gear set available with the domestic M05 pattern. We had contemplated on acquiring M05 combat gear before, but had not found a suitable manufacturer before Templar’s Gear. The actual idea of this project was born in the fall of 2017 when the first Templar’s Gear products landed at our headquarters. After finding a suitable friend and partner in Poland, it was obvious that we had to present this gift to the airsoft/reserve forces/military/defence forces/SRA shooting communities and everyone interested in the Finnish camouflage pattern. Flat Pack H2 - When Capacity Matters Templar's Gear's Flat Pack H2 is a backpack panel that attaches to the back of a plate carrier (or any vest, really). Bigger than its little brother the Flat Pack H2 carries, for example, a hydration bladder, a field radio and a few changes of clothes. With the outer surface loading straps, smaller loads can be tightened so that they do not sag or, if necessary, the Flat Pack H2 can be overloaded. Thanks to the quick attachment, you can free your backside when sitting in a car or whilst leaning against a wall and avoiding your squad leader who is looking for "volunteers". In practice, Flat Pack H2 is therefore a quickly removable hybrid of a daypack and pouches attached to the back. The most significant saving compared to the daypack vest combination comes from the weight and the lack of straps - if the idea is to carry really heavy things for really long distances, a backpack is probably more comfortable, but when it comes to quickly and efficiently carrying the necessary equipment for the task, there is no winner for the H2. The Flat Pack H2 is equipped with CPC-compatible zippers and attachment hooks, and with separately sold adapters, it fits any vest or PALS/MOLLE platform with at least 6 loops on the bottom and 4 on the top (such as Cataphract and Koursores). In principle, there is no need to have loops in the middle, as long as there are enough loops for adapters on both sides and places for MALICE-inspired plastic flaps at the top! Have a look at the Vest Packs too, if you desire more backpack-like functions, or if you want to attach the backpack panel with traditional PALS system. Features: Attaches directly to Templar's Gear CPC, CPC Low Profile, Inquisitor and TPC Gen. For 3/4 plate carriers and, if necessary, with separate adapters to practically any vest, such as Cataphract and Koursores.A removable stiffener inside, to which you can attach PALS/MOLLE system pouches or make other desired organization systems with elastic cord. The dimensions of the stiffener are 25.5 x 37 cm. The size of the PALS matrix is 6 x 5.5, the middle rows are also available. The stiffener organizer slips from its bottom edge into its own pocket and the top edge is secured in place with a Velcro loop, which can also be used to attach a hydration bladder.Opens all the way from the top and about half way from the sides - won't fall open completely by accident and let your possessions out into nature. The zipper is two-way, which means you can access the contents from both sides.Two zippered pockets on the top: the upper size approx. 23 x 9 cm, mouth opening approx. 15 cm and the lower size approx. 22 x 27 cm, mouth opening 20 cm.5 x 4 PALS matrix on top of the lower zipper pocket, the middle rows are also available. On the top one there is a 19 x 6 cm loop Velcro matrix.At the top there is a through way for hydration bladder tube, radio cables or whatever you want.Fastening/overpacking straps on the sides. The maximum circumference for overpacked items is approximately 35 cm. There are also flexible loops for handling the excess. The minimum length of the loops is practically the same as the length of the buckle, i.e. 6 cm.Manufactured from 500D Foxdura. Buckles are made by Woojin, zippers by Kroko. The backpack part weighs 385 g, the removable stiffener 145 g. So a total of 530 g, which is nothing when you compare it to the other option, i.e. a daypack with shoulder straps and other useless features, if there is a plate carrier on which the system could be attached. The dimensions are approximately 26 × 38 × 9 cm. The plumpness factor is greatly influenced by the packaging style and the packaged item(s). Using street mathematics, the estimated volume is about 8.5 liters.The most astute of you probably already noticed that the Flat Pack H2 is a little longer than a basic plate carrier. In practice, the idea is that when installed, the upper edge will be about 7 cm higher than the uppermost attachment point, but the stiffener keeps things tight and suitably conforming. With adapters, you can of course fine-tune whether the panel goes over from above, below or both. In longer vests, such as the Cataphract, the panel does not overlap (or underlap) the plate bag. If you want a backpack panel that sits nicely on the back of a plate carrier all the way, check out the little brother. Materials & manufacturing The Templar’s Gear M05 products are manufactured from the Finnish Foxa 500 denier Foxdura fabric by using laser cut technology, which enabled us to reduce the weight of the gear without compromising reliability. The material meets the Finnish Defence Forces' requirements for IRR protection and the other materials are also IRR treated. This means that the products can be safely used even in situations where you need to be hidden in the IR spectrum! The laser cut PALS webbings are also extremely durable, because they don’t have stitches which are prone to wear and tear. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear. Conscription in Finnish military Well, since someone’s going to ask anyway, let’s answer: we do not know if this gear can be used when you are in general conscription. If you want to be polite, you can ask your officer, if it’s okay to use your own gear. However, it’s usually easier to apologize later than to get permission. If necessary, we recommend you demonstrate the features of the gear, for example in the IR spectrum, where you can clearly prove that this gear has been made for military use and is not some Chinese knock-off. Cooperation - Yhteistyö - Współpraca Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear. Extended three-year warranty Templar’s Gear products are granted a three-year warranty. In more concrete manner this means for example products sold on this spring will have warranty for three action packed seasons of airsoft, shooting or whatever you do with them. Warranty covers all problems that should arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.